Functional and structural responses of a halophilic consortium to oily sludge during biodegradation.

Biotreatment of oily sludge and the involved microbial communities, particularly in saline environments, have been rarely investigated. We enriched a halophilic bacterial consortium (OS-100) from petroleum refining oily sludge, which degraded almost 86% of the aliphatic hydrocarbon (C10-C30) fraction of the oily sludge within 7 days in the presence of 100 g/L NaCl. Two halophilic hydrocarbon-degrading bacteria related to the genera Chromohalobacter and Halomonas were isolated from the OS-100 consortium. Hydrocarbon degradation by the OS-100 consortium was relatively higher compared to the isolated bacteria, indicating potential synergistic interactions among the OS-100 community members. Exclusion of FeCl2, MgCl2, CaCl2, trace elements, and vitamins from the culture medium did not significantly affect the hydrocarbon degradation efficiency of the OS-100 consortium. To the contrary, hydrocarbon biodegradation dropped from 94.1 to 54.4% and 5% when the OS-100 consortium was deprived from phosphate and nitrogen sources in the culture medium, respectively. Quantitative PCR revealed that alkB gene expression increased up to the 3rd day of incubation with 11.277-fold, consistent with the observed increments in hydrocarbon degradation. Illumina-MiSeq sequencing of 16 S rRNA gene fragments revealed that the OS-100 consortium was mainly composed of the genera Halomonas, Idiomarina, Alcanivorax and Chromohalobacter. This community structure changed depending on the culturing conditions. However, remarkable changes in the community structure were not always associated with remarkable shifts in the hydrocarbonoclastic activity and vice versa. The results show that probably synergistic interactions between community members and different subpopulations of the OS-100 consortium contributed to salinity tolerance and hydrocarbon degradation.

Fruit residues as substrates for single-cell oil production by Rhodococcus species: physiology and genomics of carbohydrate catabolism.

Strains belonging to R. opacus, R. jostii, R. fascians, R. erythropolis and R. equi exhibited differential ability to grow and produce lipids from fruit residues (grape marc and apple pomace), as well as single carbohydrates, such as glucose, gluconate, fructose and sucrose. The oleaginous species, R. opacus (strains PD630 and MR22) and R. jostii RHA1, produced higher yields of biomass (5.1-5.6 g L-1) and lipids (38-44% of CDW) from apple juice wastes, in comparison to R. erythropolis DSM43060, R. fascians F7 and R. equi ATCC6939 (4.1-4.3 g L-1 and less than 10% CDW of lipids). The production of cellular biomass and lipids were also higher in R. opacus and R. jostii (6.8-7.2 g L-1 and 33.9-36.5% of CDW of lipids) compared to R. erythropolis, R. fascians, and R. equi (3.0-3.6 g L-1 and less than 10% CDW of lipids), during cultivation of cells on wine grape waste. A genome-wide bioinformatic analysis of rhodococci indicated that oleaginous species possess a complete set of genes/proteins necessary for the efficient utilization of carbohydrates, whereas genomes from non-oleaginous rhodococcal strains lack relevant genes coding for transporters and/or enzymes for the uptake, catabolism and assimilation of carbohydrates, such as gntP, glcP, edd, eda, among others. Results of this study highlight the potential use of the oleaginous rhodococcal species to convert sugar-rich agro-industrial wastes, such as apple pomace and grape marc, into single-cell oils.

Unveiling the anticancer potentiality of single cell oils produced by marine oleaginous Paradendryphiella sp. under optimized economic growth conditions.

Bioprospecting about new marine oleaginous fungi that produce advantageous bioproducts in a green sustainable process is the key of blue bioeconomy. Herein, the marine Paradendryphiella sp. was utilized for single cell oils (SCOs) production economically, via central composite design, the lipid content enhanced 2.2-fold by 5.5 g/L lipid yeild on seawater-based media supplemented with molasses concentration 50 g/L, yeast extract, 2.25 g/L at initial pH value (5.3) and 8 days of static incubation. Subsequently, the fatty acid methyl esters profiles of SCOs produced on optimized media under different abiotic conditions were determined; signifying qualitative and quantitative variations. Interestingly, the psychrophilic-prolonged incubation increased the unsaturation level of fatty acids to 59.34%, while ω-6 and ω-3 contents representing 23.53% and 0.67% respectively. Remarkably, it exhibited the highest EC100 dose by 677.03 µg/mL on normal human lung fibroblast Wi-38 cells. Meanwhile, it showed the highest inhibiting proliferation potential on cancer cell lines of A549, MDA-MB 231 and HepG-2 cells by 372.37, 417.48 and 365.00 µg/mL, respectively. Besides, it elevated the oxidative stress, the expression of key apoptotic genes and suppressed the expression of key oncogenes (NF-κB, BCL2 and cyclin D); implying its promising efficacy in cancer treatment as adjuvant drug. This study denoted the lipogenesis capacity of Paradendryphiella sp. under acidic/alkaline and psychrophilic/mesophilic conditions. Hereby attaining efficient and economic process under seasonal variation with different Egyptian marine sources to fill the gap of freshwater crisis and simultaneously preserve energy.

Current advances in alteration of fatty acid profile in Rhodotorula toruloides: a mini-review.

Microbial lipids are considered promising and environmentally friendly substitutes for fossil fuels and plant-derived oils. They alleviate the depletion of limited petroleum storage and the decrement of arable lands resulting from the greenhouse effect. Microbial lipids derived from oleaginous yeasts provide fatty acid profiles similar to plant-derived oils, which are considered as sustainable and alternative feedstocks for use in the biofuel, cosmetics, and food industries. Rhodotorula toruloides is an intriguing oleaginous yeast strain that can accumulate more than 70% of its dry biomass as lipid content. It can utilize a wide range of substrates, including low-cost sugars and industrial waste. It is also robust against various industrial inhibitors. However, precise control of the fatty acid profile of the lipids produced by R. toruloides is essential for broadening its biotechnological applications. This mini-review describes recent progress in identifying fatty synthesis pathways and consolidated strategies used for specific fatty acid-rich lipid production via metabolic engineering, strain domestication. In addition, this mini-review summarized the effects of culture conditions on fatty acid profiles in R. toruloides. The perspectives and constraints of harnessing R. toruloides for tailored lipid production are also discussed in this mini-review.

Engineering the Staple Oil Crop Brassica napus Enriched with α-Linolenic Acid Using the Perilla FAD2-FAD3 Fusion Gene.

Modern people generally suffer from α-linolenic acid (ALA) deficiency, since most staple food oils are low in ALA content. Thus, the enhancement of ALA in staple oil crops is of importance. In this study, the FAD2 and FAD3 coding regions from the ALA-king species Perilla frutescens were fused using a newly designed double linker LP4-2A, driven by a seed-specific promoter PNAP, and engineered into a rapeseed elite cultivar ZS10 with canola quality background. The mean ALA content in the seed oil of PNAP:PfFAD2-PfFAD3 (N23) T5 lines was 3.34-fold that of the control (32.08 vs 9.59%), with the best line being up to 37.47%. There are no significant side effects of the engineered constructs on the background traits including oil content. In fatty acid biosynthesis pathways, the expression levels of structural genes as well as regulatory genes were significantly upregulated in N23 lines. On the other hand, the expression levels of genes encoding the positive regulators of flavonoid-proanthocyanidin biosynthesis but negative regulators of oil accumulation were significantly downregulated. Surprisingly, the ALA level in PfFAD2-PfFAD3 transgenic rapeseed lines driven by the constitutive promoter PD35S was not increased or even showed a slight decrease due to the lower level of foreign gene expression and downregulation of the endogenous orthologous genes BnFAD2 and BnFAD3.

Oily bilge water treatment using indigenous soil bacteria: Implications for recycling the treated sludge in vegetable farming.

Hydrocarbon contamination from motorized vessels operating on seas threaten marine ecosystems and need to treated efficiently. A bilge wastewater treatment using indigenous bacteria isolated from oil contaminated soil was studied. Five bacterial isolates (Acinetobacter baumanni, Klebsiella aerogenes, Pseudomonas fluorescence, Bacillus subtilis and Brevibacterium linens) were isolated from port soil and used in the bilge water treatment. Their crude oil degradation abilities were first confirmed experimentally. The single species and the consortia of each two species were compared in an experiment where the conditions were first optimized. The optimized conditions were 40 °C, carbon source glucose, nitrogen source ammonium chloride, pH 8, and salinity 25%. Each of the species and each combination was able to degrade oil. K. aerogenes and P. fluorescence were the most efficient in reducing the crude oil concentration. The crude oil concentration was reduced from 290 mg/L to 23 mg/L and 21 mg/L, respectively. The respective values for the loss in turbidity were from 320 NTU to 29 mg/L and 27 NTU and for BOD loss from 210 mg/L to 18 mg/L and 16 mg/L. Mn was reduced from 25.4 mg/L to 1.2 mg/L and 1.0 mg/L, Cu from 26.8 mg/L to 2.9 mg/L and 2.4 mg/L, and Pb from 29.8 mg/L to 1.5 mg/L and 1.8 mg/L. The consortium of K. aerogenes and P. fluorescence in the bilge wastewater treatment reduced the crude oil concentration to 11 mg/L. After the treatment, the water was removed and the sludge was composted with palm molasses and cow dung. After 60 days of composting and inoculation with different bacterial consortia, the final product was used as a seedbed for vegetables. The compost with the consortium K. aerogenes and P. fluorescence promoted vegetable plant growth most and could be used in farming.

Value-Added Squalene in Single-Cell Oil Produced with Cutaneotrichosporon oleaginosus for Food Applications.

Single-cell oil (SCO) produced by oleaginous microorganisms is potentially a more land-efficient and sustainable alternative to vegetable oil. The cost of SCO production can be reduced by value-added co-products like squalene, a highly relevant compound for the food, cosmetic, and pharmaceutical industry. For the first time, squalene in the oleaginous yeast Cutaneotrichosporon oleaginosus was analyzed, reaching 172.95 ± 61.31 mg/100 g oil in a lab-scale bioreactor. Using the squalene monooxygenase inhibitor terbinafine, cellular squalene was significantly increased to 2169 ± 262 mg/100 g SCO, while the yeast remained highly oleaginous. Further, SCO from a 1000 L scale production was chemically refined. The squalene content in the deodorizer distillate (DD) was found to be higher than that in DD from typical vegetable oils. Overall, this study demonstrates squalene as a value-added compound in SCO from C. oleaginosus for application in food and cosmetics without the use of genetic modifications.

Identification of glucosinolates and volatile odor compounds in microwaved radish (Raphanus sativus L.) seeds and the corresponding oils by UPLC-IMS-QTOF-MS and GC × GC-qMS analysis.

The effect of microwave treatment on the content of glucosinolates (GSL) in radish seeds and volatile odor compounds in the microwaved radish seed oils (MRSO) is still unclear. In this study, a total of 13 GSL were identified and quantified in five radish seed varieties by UPLC-IMS-QTOF-MS, among which glucoraphenin, glucoraphasatin, glucoerucin accounting for up to 90 %. Total GSL decreased by 47.39-67.88% after microwave processing. Moreover, 58 odor compounds were identified in MRSO, including 6 sulfides, 12 nitriles, 2 isothiocyanates, 10 alcohols, 12 aldehydes, 5 ketones, 6 acids, and 5 others. The major odor compounds were (methyldisulfanyl)methane, dimethyltrisulfane, (methylsulfinyl)methane, 3-(methylsulfanyl)-1-propanol, methyl thiocyanate, hexanenitrile, 5-(methylsulfanyl)pentanenitrile, and 4-isothiocyanato-1-butene with odor activity value (OAV) higher than 1. The principal components analysis (PCA) results can distinguish MRSO from five different radish seed varieties, three of which (H20-18, H20-19 and H20-28) were in one group and other two (H20-23 and H20-26) were in another group. In addition, aliphatic GSL showed positive correlations with sulfides, isothiocyanates, and nitriles, while negative correlations with alcohols. This work provides a new insight into the odor contribution of GSL degradation products.

Using oils and fats to replace sugars as feedstocks for biomanufacturing: Challenges and opportunities for the yeast Yarrowia lipolytica.

More than 200 million tons of plant oils and animal fats are produced annually worldwide from oil, crops, and the rendered animal fat industry. Triacylglycerol, an abundant energy-dense compound, is the major form of lipid in oils and fats. While oils or fats are very important raw materials and functional ingredients for food or related products, a significant portion is currently diverted to or recovered as waste. To significantly increase the value of waste oils or fats and expand their applications with a minimal environmental footprint, microbial biomanufacturing is presented as an effective strategy for adding value. Though both bacteria and yeast can be engineered to use oils or fats as the biomanufacturing feedstocks, the yeast Yarrowia lipolytica is presented as one of the most attractive platforms. Y. lipolytica is oleaginous, generally regarded as safe, demonstrated as a promising industrial producer, and has unique capabilities for efficient catabolism and bioconversion of lipid substrates. This review summarizes the major challenges and opportunities for Y. lipolytica as a new biomanufacturing platform for the production of value-added products from oils and fats. This review also discusses relevant cellular and metabolic engineering strategies such as fatty acid transport, fatty acid catabolism and bioconversion, redox balances and energy yield, cell morphology and stress response, and bioreaction engineering. Finally, this review highlights specific product classes including long-chain diacids, wax esters, terpenes, and carotenoids with unique synthesis opportunities from oils and fats in Y. lipolytica.

Growth of mesenchymal stem cells at the surface of silicone, mineral and plant-based oils.

Bioemulsions are attractive platforms for the expansion of adherent cells in bioreactors. Their design relies on the self-assembly of protein nanosheets at liquid-liquid interfaces, displaying strong interfacial mechanical properties and promoting integrin-mediated cell adhesion. However, most systems developed to date have focused on fluorinated oils, which are unlikely to be accepted for direct implantation of resulting cell products for regenerative medicine, and protein nanosheets self-assembly at other interfaces has not been investigated. In this report, the composition of aliphatic pro-surfactants palmitoyl chloride and sebacoyl chloride, on the assembly kinetics of poly(L-lysine) at silicone oil interfaces and characterisation of ultimate interfacial shear mechanics and viscoelasticity is presented. The impact of the resulting nanosheets on the adhesion of mesenchymal stem cells (MSCs) is investigated via immunostaining and fluorescence microscopy, demonstrating the engagement of the classic focal adhesion-actin cytoskeleton machinery. The ability of MSCs to proliferate at the corresponding interfaces is quantified. In addition, expansion of MSCs at other non-fluorinated oil interfaces, based on mineral and plant-based oils is investigated. Finally, the proof-of-concept of such non-fluorinated oil systems for the formulation of bioemulsions supporting stem cell adhesion and expansion is demonstrated.

Expression of glycerol-3-phosphate acyltransferase increases non-polar lipid accumulation in Nannochloropsis oceanica.

Microalgae are considered a suitable production platform for high-value lipids and oleochemicals. Several species including Nannochloropsis oceanica produce large amounts of essential [Formula: see text]-3 polyunsaturated fatty acids (PUFAs) which are integral components of food and feed and have been associated with health-promoting effects. N. oceanica can further accumulate high contents of non-polar lipids with chemical properties that render them a potential replacement for plant oils such as palm oil. However, biomass and lipid productivities obtained with microalgae need to be improved to reach commercial feasibility. Genetic engineering can improve biomass and lipid productivities, for instance by increasing carbon flux to lipids. Here, we report the overexpression of glycerol-3-phosphate acyltransferase (GPAT) in N. oceanica during favorable growth conditions as a strategy to increase non-polar lipid content. Transformants overproducing either an endogenous (NoGPAT) or a heterologous (Acutodesmus obliquus GPAT) GPAT enzyme targeted to the endoplasmic reticulum had up to 42% and 51% increased non-polar lipid contents, respectively, compared to the wild type. Biomass productivities of transformant strains were not substantially impaired, resulting in lipid productivities that were increased by up to 37% and 42% for NoGPAT and AoGPAT transformants, respectively. When exposed to nutrient stress, transformants and wild type had similar lipid contents, suggesting that GPAT enzyme exerts strong flux control on lipid synthesis in N. oceanica under favorable growth conditions. NoGPAT transformants further accumulated PUFAs in non-polar lipids, reaching a total of 6.8% PUFAs per biomass, an increase of 24% relative to the wild type. Overall, our results indicate that GPAT is an interesting target for engineering of lipid metabolism in microalgae, in order to improve non-polar lipid and PUFAs accumulation in microalgae.

Evaluation of 1,2-diacyl-3-acetyl triacylglycerol production in Yarrowia lipolytica.

Plants produce many high-value oleochemical molecules. While oil-crop agriculture is performed at industrial scales, suitable land is not available to meet global oleochemical demand. Worse, establishing new oil-crop farms often comes with the environmental cost of tropical deforestation. The field of metabolic engineering offers tools to transplant oleochemical metabolism into tractable hosts while simultaneously providing access to molecules produced by non-agricultural plants. Here, we evaluate strategies for rewiring metabolism in the oleaginous yeast Yarrowia lipolytica to synthesize a foreign lipid, 3-acetyl-1,2-diacyl-sn-glycerol (acTAG). Oils made up of acTAG have a reduced viscosity and melting point relative to traditional triacylglycerol oils making them attractive as low-grade diesels, lubricants, and emulsifiers. This manuscript describes a metabolic engineering study that established acTAG production at g/L scale, exploration of the impact of lipid bodies on acTAG titer, and a techno-economic analysis that establishes the performance benchmarks required for microbial acTAG production to be economically feasible.

A robust soft sensor based on artificial neural network for monitoring microbial lipid fermentation processes using Yarrowia lipolytica.

Microbial oils produced by Yarrowia lipolytica offer an environmentally friendly and sustainable alternative to petroleum as well as traditional lipids from animals and plants. The accurate measurement of fermentation parameters, including the substrate concentration, dry cell weight, and lipid accumulation, is the foundation of process control, which is indispensable for industrial lipid production. However, it remains a great challenge to measure the complex parameters online during the lipid fermentation process, which is nonlinear, multivariate, and characterized by strong coupling. As a type of AI technology, the artificial neural network model is a powerful tool for handling extremely complex problems, and it can be employed to develop a soft sensor to monitor the microbial lipid fermentation process of Y. lipolytica. In this study, we first analyzed and emphasized the volume of sodium hydroxide and dissolved oxygen concentration as central parameters of the fermentation process. Then, a soft sensor based on a four-input artificial neural network model was developed, in which the input variables were fermentation time, dissolved oxygen concentration, initial glucose concentration, and additional volume of sodium hydroxide. This provides the possibility of online monitoring of dry cell weight, glucose concentration, and lipid production with high accuracy, which can be extended to similar fermentation processes characterized by the addition of bases or acids, as well as changes of the dissolved oxygen concentration.

Quantitative determination of concentration profiles of skin components and topically applied oils by tailored multivariate curve resolution-alternating least squares using in vivo confocal Raman micro-spectroscopy.

The main components of the stratum corneum (SC), water, lipids, and proteins, are non-homogeneously distributed throughout the depth. The quantitative determination of their concentration profiles and penetration depth of topically applied substances are urgent topics of dermatological and cosmetic research. Confocal Raman micro-spectroscopy has distinct advantages when determining semi-quantitative concentrations of SC components and topically applied substances non-invasively and in vivo. In this work, we applied a tailored multivariate curve resolution-alternating least squares (tMCR-ALS) method to analyze Raman spectra of the SC in the 2000-4000 cm-1 region for quantitatively determining the concentrations of water, lipids, proteins, and topically applied oils using substance-related spectral loadings which were allowed to change depth-dependently from the SC's surface toward its bottom. tMCR-ALS makes matching of depth-dependent signal attenuation, that is, the normalization on keratin, unnecessary and requires only a few additional experiments for calibration - Raman spectra of the pure materials and their densities.

Biochemistry and Biotechnology of Lipid Accumulation in the Microalga Nannochloropsis oceanica.

Oils are among the most important agricultural commodities and have wide applications in food/nutrition, biofuels, and oleochemicals. The oleaginous microalga Nannochloropsis oceanica can produce large amounts of oils and the high-value ω-3 eicosapentaenoic acid, which represents a promising resource for oil production targeting biodiesel, nutraceutical, and aquaculture industries. In recent years, with the availability of omics databases and the development of genetic tools, N. oceanica has been extensively investigated as a model photosynthetic organism for studying lipid metabolism and as a green cellular factory to produce lipids for industrial applications. This review summarizes the current knowledge on the lipid composition and biosynthetic pathways of N. oceanica and reviews the recent advances in metabolic engineering of lipid production in this microalga.

Improving the in vitro and in vivo bioavailability of pterostilbene using Yesso scallop gonad protein isolates-epigallocatechin gallate (EGCG) conjugate-based emulsions: effects of carrier oil.

This study investigated the influence of carrier oils on the in vitro and in vivo bioavailability of PTE encapsulated in scallop gonad protein isolates (SGPIs)-epigallocatechin gallate (EGCG) conjugate stabilized emulsions. The SGPIs-EGCG stabilized emulsions were subjected to an in vitro simulated digestion, and the resulting corn oil and MCT micelles were used to evaluate the PTE transportation using the Caco-2 cell model. Both emulsions remarkably improved the bioaccessibility of PTE in the micelle phase. Nevertheless, corn oil emulsions increased trans-enterocyte transportation of PTE more efficiently than MCT emulsions. Furthermore, the maximum plasma concentrations of PTE and its metabolites in mice fed with PTE emulsions were prominently higher than those in mice fed with PTE solution, while the in vivo metabolic patterns of PTE in different oil-stabilized emulsions were different. Therefore, SGPIs-EGCG stabilized emulsions could enhance the bioavailability of PTE through controlled release, in which corn oil is more suitable than MCT.

Lipidome reveals the alleviation of acrylamide-induced impairment by krill oil.

Krill oil is rich in polyunsaturated fatty acids and has various biological functions. Previous research studies have demonstrated that krill oil is helpful to improve locomotion via antioxidation and regulation of energy metabolism, but the alteration of relevant lipids and mechanisms still remains unclear. In this study, we observed recovery in the impairment of Caenorhabditis elegans (C. elegans) caused by acrylamide using the krill oil. Locomotion assays indicated that the supplement of krill oil enhanced head thrashes and body bends by 16.4% and 19.3% respectively in impaired C. elegans. The altered expressions of genes related to neuron status (dat-1), antioxidants (sod-3 and gst-4) and energy metabolism (daf-2 and akt-1) in impaired C. elegans were also reversed by treatment with krill oil. Lipidomics analysis suggested that krill oil could restore the metabolic changes induced by acrylamide, including the downregulation of ceramides and fatty acids and the upregulation of glycerophospholipids containing polyunsaturated fatty acids. Some of these lipids also showed significant correlations with the varied genes. In conclusion, krill oil could ameliorate the locomotion of impaired C. elegans via suppressing the oxidative stress and promoting energy supply. Our findings facilitate the functional studies of krill oil.

Characterisation of two novel genes encoding Δ9 fatty acid desaturases (CeSADs) for oleic acid accumulation in the oil-rich tuber of Cyperus esculentus.

Cyperus esculentus is considered one of the most promising oil crops due to its oil-rich tuber, wide adaptability and large biomass production. Preferable triacylglycerol (TAG) composition, especially high oleic acid content, makes tuber oil suitable for human consumption and biodiesel production. However, the mechanism underlying oleic acid enrichment in the tuber remains unknown. Plastidial stearoyl-ACP desaturase (SAD) catalyses the formation of monounsaturated fatty acids (MUFAs), which may function crucially for high accumulation of oleic acid in C. esculentus tubers. In this study, two full-length cDNAs encoding SAD were isolated from the developing tubers of C. esculentus, namely, CeSAD1 and CeSAD2, with ORFs of 1194 bp and 1161 bp, respectively. Quantitative RT-PCR analysis showed that CeSAD genes were highly expressed in tubers. The expression pattern during tuber formation was also significantly correlated with fatty acid and oil accumulation dynamics. Overexpression of each CeSAD gene could restore the normal growth of the defective yeast BY4389, indicating that both CeSADs had fatty acid desaturase activity to catalyse MUFA biosynthesis. A tobacco genetic transformation assay demonstrated that both CeSAD enzymes had high enzyme activity. Exogenous addition of exogenous fatty acids to feed yeast revealed that CeSAD1 has a more substantial substrate preference ratio for C18:0 than CeSAD2 did. Moreover, the overexpression of CeSAD1 significantly increased host tolerance against low-temperature stress. Our data add new insights into the deep elucidation of oleic acid-enriched oils in Cyperus esculentus tubers, showing CeSAD, especially CeSAD1, as the target gene in genetic modification to increase oil and oleic yields in oil crops as well as stress tolerance.

Biodegradation of used motor oil by Streptomyces ginkgonis KM-1-2, isolated from soil polluted by waste oils in the region of Azzaba (Skikda-Algeria).

Actinobacteria have many properties that make them good candidates for the bioremediation of sites contaminated by several organic and inorganic pollutants. However, studies on the biodegradation of used motor oils by Actinobacteria, compared to other bacteria, remain little studied. Actinobacteria were isolated from soil contaminated with used motor oils and sewage sludge in order to select a species that can effectively degrade such pollutants. This study aims to assess their degradation capacity of the various hydrocarbon fractions contained in the oil by gas chromatography-mass spectrometry (GC-MS). Five Actinobacteria isolates were isolated by the enrichment method. The S1.1. A strain was considered the best biosurfactant producing strain. It presents the highest emulsification index compared to other isolated Actinobacteria (82.6%). Phenotypic and molecular identification by sequencing the 16 S rDNA gene makes it possible to assign this isolate to the species Streptomyces ginkgonis KM-1-2. Gravimetric analysis results of biodegraded used motor oil indicated that this strain is capable of degrading 76.4% of an initial 50 ml/l concentration of used motor oil after 4 weeks of incubation. The results of GC-MS analysis of the residual motor oil showed that strain S1.1. A degraded some long and intermediate chain alkanes completely or to shorter fractions. The Streptomyces ginkgonis strain KM-1-2 was also able to degrade certain alkylated mono-aromatic hydrocarbons linked to benzene, as well as certain alkylated and non-alkylated polycyclic aromatic hydrocarbons linked to anthracene, naphthalene, phenanthrene, fluorene, and azulene. This strain exhibited the highest emulsification index at 82.6%. This bacterium shows a significant biodegradation capacity and could, consequently, be used in the processes of bioaugmentation of sites contaminated by these oils.

In vitro characterization and clinical evaluation of skin hydration by two formulations mimicking the skin's natural components.

BACKGROUND: We have developed innovative base formulations that were designed to mimic the skin with respect to its components and galenic structure. Components include water, proteins, lipids, sugars and minerals. OBJECTIVES: We characterized formulations and their skin penetration using in vitro methods and evaluated their impact on skin hydration in a clinical trial. METHODS: Scanning electron microscopy (SEM) imaging and X-ray diffraction were used to analyse formulations as well as formulation impact on the stratum corneum (SC) structure. Mass spectrometry imaging (MSI) was used to compare formulation ingredients with SC components and to detect their distribution in the skin. Clinical studies were performed to confirm effects on skin hydration and investigate potential adverse skin effects (irritation and sensitization). RESULTS: SEM and X-ray diffraction of the formulations showed that lipids were organized in sheets similar to SC lipids. MSI demonstrated similarities between formulation components and skin constituents, as well as a good penetration into the skin. The formulations did not modify the lamellar organization of the SC lipids, but they increased the relative proportion of the crystallized lipids and some of the amorphous lipids. In in vivo studies, a high level of hydration was maintained over 24 h after application with an intense and 'very good hydration'. Both formulations were shown to be non-(photo)sensitizers with excellent tolerance. Sensorial evaluation indicated the formulations were not oily or sticky and maintained the skin's suppleness over time. Formulations had a 'nude skin' touch and created a natural protective film. CONCLUSIONS: The two formulations were well-tolerated and increased skin hydration in clinical subjects, an effect that could contribute to the alleviation of sensitive skin. The formulations were shown to resemble the lipid organization of the stratum corneum, as well as penetrate the skin without disrupting the lipid lamella organization.